What are Shear Keys and How to Use Them
Shear keys can be constructed by concrete in precast buildings, and of steel in steel structures. Sometimes, steel reinforcements are made to play the part of shear keys as well. They improve the lateral stability of a building.
Placement of Shear Keys
Where the shear keys will be placed differs a lot depending upon the structure they need to support. Let us discuss them below.
In small to medium bridge structures, shear keys are placed in the abutments of the bridge. This provides lateral transverse support to the structure above during sidewise movement. During an earthquake or similar strong lateral force application, the shear keys act as a sacrifice. Therefore, the strong seismic forces are prevented from entering the abutment piles. They act better when they are placed on the outer side of the bridge. However, this makes them difficult to inspect or repair.
You should place shear keys at the base of retaining walls, just beneath the stem. This prevents sliding of the base during strong lateral force application. The shear keys placed beneath the wall must be nearly twice in width than their depth for the best performance. Generally, they are 508mm by 381 mm, respectively.
Basement Wall and Footing
At the joint of the footing and the basement wall a shear key must be provided to prevent it from moving laterally. It should be cast as a part of the wall, extending right into groove in the footing. Sometimes, extra reinforcement bars are provided for extra strength.
Steel Column and Footing
Similarly as above, shear keys are inserted into the joint between the base of steel columns and footings. In this case, a special type of key is used, like an I-section or T-section. It is welded onto the bottom of the base plate. Which makes them very strong in resisting shearing forces.
It is difficult to provide proper shearing resistance in precast building components due to their very nature. However, an ad-hoc solution can be to provide shear keys in the joints of different precast concrete blocks. This increases their resistance to lateral shifting.
A building and structure has to bear not only vertical loads, but also lateral loads. This can occur due to many design or natural reasons. To counteract this lateral load, Shear Keys are used. Let us see today what exactly are shear keys and how can you use them in your construction.
A building can face a lot of lateral load due to many reasons. Some of these include earthquake loads, sliding forces, water pressure, wind pressure etc. This often occurs with bridges, retaining walls, basements, extremely tall buildings, precast buildings and culverts, masonry walls where seismic activity is stronger, and steel columns and piers.
In regions where there are a lot of seismic activity regularly (Japan, for instance), using precast keys in masonry buildings is a must. Here, shear keys are used in between masonry blocks. Sometimes, the blocks themselves come equipped with shear keys from manufacturing.
- Quantity Takeoff Software
- PileGroup is an exclusive
- New construction against design
- Tekla formwork placing tools
- Powerful construction program